
Indigenous Flight Avionics Suite
Sanket
FPV camera and video transmitter. Sanket means “signal”.

The airborne half of the SPATICS video link: a finned transmitter, two radome antennas and a single-lens camera.
Sanket is the airborne half of the SPATICS video link: a square finned aluminium transmitter with two radome antennas, a slim coaxial cable to a single-lens camera and a USB-C service port. It fits inside the airframe and sends a low-latency pilot view to Netra goggles or the Kendra ground station.
Indicative specification
| Camera sensor | 1/1.8 to 1/1.3-inch CMOS, 8 to 12 MP class |
|---|---|
| Field of view | ~150° |
| On-board recording | 1080p120 class, up to 4K60 class; microSD or 32 GB internal |
| Live view | 1080p100 class |
| Latency | Under 30 ms class, camera to goggle |
| Link | 5.8 GHz digital (5725 to 5850 MHz), dual antenna |
| Range | 4 to 10 km class, line of sight, region-dependent |
| Output power | Up to 30 dBm EIRP class, regulatory-limited |
| Transmitter size | 33.5 × 33.5 × 13 mm class; 20 × 20 and 25.5 × 25.5 mm mounting |
| Weight | Transmitter 15 to 25 g; camera ~10 g; antennas ~2 g each |
| Input | 7 to 26 V (2S to 6S) |
| Operating temperature | −10 to +40 °C |
All figures are indicative targets, subject to validation; range and output power are limited by Indian WPC rules for the 5.8 GHz band, and 4K recording depends on the final encoder.
Interfaces and compatibility
- Display: Netra goggles, with the Kendra ground station as a second receiver.
- Airframe: a keyed power and data socket on the transmitter, shared with the SPATICS connector family, and USB-C for firmware and file transfer.
- Control: flight-controller UART for OSD and channel data.