
Indigenous Flight Avionics Suite
Shadanga
Six-arm inspection hexacopter. Shadanga means “six-limbed”.

A modular platform for close-range inspection and field service, carrying the Drishti gimbal or a utility cassette.
Shadanga is a modular six-rotor platform for close-range inspection and field service. It hovers beside the asset with an interchangeable belly module, carries the Drishti multi-sensor gimbal as its primary payload and accepts a spot-spray cassette on the same rails.
Indicative specification
| Configuration | Hexacopter, 6 × 22-inch two-blade rotors |
|---|---|
| Motor-circle diameter | ~1400 mm; rotor envelope ~1960 mm |
| Maximum take-off weight | 10 to 12 kg class (DGCA Small category) |
| Mission-module allowance | Up to 3 kg including mount and hardware |
| Hover endurance | 30 to 40 min unloaded; 20 to 25 min with a 3 kg module |
| Wind tolerance | 10 m/s class |
| Ingress | IP43 to IP54 target, weather-resistant |
| Operating temperature | −10 to +45 °C |
| Command and video link | 8 to 10 km line of sight, encrypted |
| Positioning | Multi-constellation GNSS with NavIC; RTK option |
| Flight computer | STM32H7-class, redundant IMU |
| Propulsion | 6 × Vega GaN motor controllers, one per arm |
All figures are indicative targets, subject to engineering validation and to QCI/DGCA type certification under the Drone Rules 2021; six rotors alone do not guarantee motor-out recovery.
Interfaces and compatibility
- Payload: the Drishti gimbal on the quick-release plate with a keyed power and data connector, and the Sanket air unit for a pilot view.
- Ground: the Kendra ground station, with Netra goggles for the FPV feed.
- Power: two hot-swappable smart packs, charged through the pack rather than the airframe.