Back to Vega

Indigenous Flight Avionics Suite

Vega

Enclosed GaN motor controller. Vega means “speed”.

Vega motor controller: anodised aluminium enclosure with a finned heat-sink, battery and phase leads

A sealed single-motor speed controller for the 22-inch class, one per lift motor on Shadanga and Uddan.

Vega is a sealed single-motor electronic speed controller for the 22-inch class: a slim anodised aluminium enclosure with a ribbed heat-sink on top, battery leads at one end and three phase leads at the other. One Vega sits in each arm of Shadanga, and the same unit drives the lift motors of Uddan.

Indicative specification

Vega indicative specification
Continuous current80 A class, with arm airflow
Peak current120 A for 10 s
Voltage6S to 14S LiPo (22 to 60 V)
Power stageGaN half-bridges
DriveSensorless field-oriented control
Control inputPWM 50 to 500 Hz, DShot
TelemetryDroneCAN: voltage, current, RPM, temperature
ProtectionsOver-current, over-temperature, stall and lock, signal loss, under-voltage
IngressIP55 to IP56 class
Enclosure~90 × 40 × 20 mm class, excluding leads
Weight90 to 120 g without cables
Operating temperature−20 to +60 °C

All figures are indicative targets, subject to electrical and thermal validation; the continuous rating assumes propeller airflow over the heat-sink.

Interfaces and compatibility

  • Motors: 22-inch class outrunners on Shadanga and the lift motors on Uddan.
  • Flight computer: the STM32H7-class SPATICS controller over DShot with DroneCAN telemetry; ArduPilot and PX4 compatible.
  • Mounting: four M3 ears on a flat arm saddle, with the heat-sink in the propeller downwash.

Request the full datasheet: spatics.in/avionics/motor-controller/ or info@spatics.in

Sparrotronics Private Limited, No. 48, Virajitha, 3rd Main Road, AMS Layout, Vidyaranyapura, Chikkabettahalli, Bengaluru – 560097, Karnataka, India.

Vega is concept hardware in development and is not offered for sale. Export may be subject to Indian SCOMET controls.